How to Crochet a Donut: The Ring Shape Formula That Always Works
One repeatable formula for plump, even crochet rings and donuts in any size, with no ruffling, no cupping and no guesswork.
A crochet donut looks like the easiest thing in the world until you actually make one. You work a tube, you join it into a circle, and somehow it comes out lumpy on one side, twisted on the other, with a hole that is either a pinprick or a crater. The shape is round, so it should be simple. It is not simple, because a donut is not one shape. It is a circle wrapped around a second circle, and those two circles have to agree with each other.
That is the whole principle, and once you hold it in your head the donut stops being a mystery project. The shape has a name in geometry — a torus — and it behaves according to rules you can write down. This guide gives you those rules as a formula you can scale to a tiny teething ring, a chunky floor cushion, or a soft play donut for a baby gift basket, without hunting for a new pattern every time the size changes.
We are going to build it the same way we built the flat circle and the sphere: understand what the stitches are doing, then follow a count that makes the fabric do it on purpose. By the end you will know why your ring ruffled, why it cupped, and exactly which number to change to fix it.
The three things that decide whether your donut works
Every ring problem traces back to one of these. Read them in order before you pick up a hook.
Ruffling means you increased too fast
A ring has two edges and they grow at different speeds. The outer edge travels a longer distance than the inner edge, so it needs more stitches. If you add those extra stitches faster than the curve requires, the outer edge runs out of room and buckles into waves. That is the pink ring in the photo. The cream ring uses the same yarn and the same hook, but one fewer increase per round. Ruffling is never a tension fault on its own; it is an arithmetic fault that tension makes more visible.
Read the flat circle formula →
A donut is stuffed through a moving opening
Unlike a ball, you cannot stuff a ring at the end. The opening closes gradually as you work around, so you stuff in sections, a little at a time, staying roughly a third of the way behind your hook. Overstuff and the ring goes rigid and the stitches gape; understuff and it flops into a sad oval. Cotton yarn needs firmer stuffing than acrylic because it has no spring of its own. Work in small pinches rather than one large wad, and smooth each pinch outward toward the far side of the tube before you add the next.
Read the stuffing guide →
Two numbers give you every size
The starting chain sets the hole. The number of straight rounds sets the thickness. Those two numbers are independent, which is why one formula produces a slim bangle, a chunky play donut and a wide floor cushion without any redesign. A short chain with many rounds gives a fat ring with a tight centre. A long chain with few rounds gives a thin hoop. Decide the hole first, because you cannot change it later without starting over.
Browse amigurumi patterns →The donut formula, step by step
This is the core method. Work in continuous rounds with a stitch marker in the first stitch of each round, and use single crochet throughout unless you want a looser, more open fabric. Every instruction below is written in US terms.
- Choose your hole. Chain an even number of stitches and join with a slip stitch into the first chain to form a loop. This loop is the inner edge of your donut and its circumference is the hole. A chain of 24 gives a generous centre; a chain of 12 gives a tight one. Keep the chain untwisted when you join.
- Round 1 — set the base. Single crochet once into each chain around. You now have a flat ring of fabric the same count as your chain. Do not increase yet. This round establishes the inner circumference and stops the chain from stretching.
- Rounds 2 to 4 — grow the outer curve. Increase evenly to build the outward bulge. For a chain of 24: round 2 is (sc 3, inc) repeated, round 3 is (sc 4, inc) repeated, round 4 is (sc 5, inc) repeated. The pattern is the same stair-step used for a flat circle, just started from your chain count instead of from a magic ring.
- Rounds 5 onward — build the depth. Work straight rounds with no increases and no decreases. Each straight round adds roughly one stitch height of thickness to the tube. Three to five straight rounds gives a soft everyday donut; eight or more gives a chunky cushion.
- Start stuffing. Once the tube is deep enough that you can see a channel forming, begin adding small pinches of fiberfill. Keep stuffing as you go. Never wait until the end.
- Mirror your decreases. Now reverse the increase rounds exactly. If round 4 was (sc 5, inc), your matching decrease round is (sc 5, dec). Work back down through the same counts in reverse order. This symmetry is what makes both faces of the donut match.
- Close against the inner ring. Your final decrease round should leave you with the same stitch count as your starting chain. Line the live stitches up against the free loops of the original chain and join the two edges with a whipstitch or a row of slip stitches, stuffing the last section just before you seal it.
- Settle the shape. Roll the finished donut gently between both palms. This redistributes the stuffing, evens the stitch tension and rounds out any flat spot left by the closing seam.
Increase and decrease counts at a glance
Use this table to scale the formula. The chain count sets the hole; everything else follows from it.
| Starting chain | Increase rounds | Straight rounds | Finished character |
|---|---|---|---|
| 12 | (sc 1, inc), (sc 2, inc) | 3 | Small ring, tight centre, keyring scale |
| 18 | (sc 2, inc), (sc 3, inc) | 4 | Teething or rattle ring |
| 24 | (sc 3, inc), (sc 4, inc), (sc 5, inc) | 5 | Classic play donut |
| 36 | (sc 5, inc), (sc 6, inc), (sc 7, inc) | 7 | Large plush donut |
| 48 | (sc 7, inc), (sc 8, inc), (sc 9, inc) | 10 | Floor cushion or pouffe |
Fixes for the four problems that actually happen
- The outer edge ruffles. Remove one increase round, or spread the same increases across more rounds. Work the next increase round as (sc 6, inc) instead of (sc 5, inc).
- The ring cups into a bowl. You increased too slowly. Add one more increase round before you start the straight section.
- One side is fatter than the other. Your decreases do not mirror your increases. Count back through your notes and match them round for round.
- Stuffing shows through the stitches. Go down one hook size and rework, or line the tube with a thin layer of fiberfill batting before adding the loose stuffing.
- The closing seam is visible. Seam through the back loops only and keep your whipstitch tension matched to the surrounding fabric rather than pulled tight.
Choosing yarn for a ring shape
Ring shapes are more sensitive to yarn choice than most amigurumi, because the fabric has to hold a curve in two directions at once. Mercerised cotton gives crisp stitch definition and a firm ring that holds its circle, which is what you want for teething rings, bag handles and anything that will be gripped. Acrylic is softer and more forgiving of uneven tension, making it the easier choice for a first attempt and for larger cushions where weight matters.
Avoid anything with a long halo for your first donut. Fluffy yarns hide your stitches, and on a ring shape you genuinely need to see where each increase landed. Save the textured yarn for the second one, once your counts are reliable. If you are unsure which weight to pick, our guide to crochet yarn weights walks through the trade-offs in detail.
Hook size matters more here too. For a stuffed ring, go down one or two sizes from the yarn label recommendation. A tighter fabric keeps the fiberfill invisible and gives the donut a satisfying density. If your stitches feel like hard work, you have gone one size too far.
Where the donut shape shows up
Once the formula is in your hands you will start seeing rings everywhere in amigurumi. Life rings and pool floats for beach scenes. Wreath bases for seasonal decor. Tyre shapes for vehicles. Bagels, cookies and play food for a toy kitchen. Rattles and teething rings for baby gifts. The soft donut in a gift basket is only the most obvious use, and it is rarely the most interesting one.
The same formula also solves a problem that is not obviously a ring at all: any part of a toy that has to wrap around something else. Collars, inner tubes, the base of a standing figure, the join between a head and a wide body. If the shape has a hole through the middle and volume around it, this is the method.
A donut is just a circle that learned to hold its shape in two directions at once. Get the increases right and the rest is patience.— Ava, MrsCrochetWorld
Keep exploring

The increase formula every ring shape is built on.
Read the guide →
The ball formula, and how its decreases mirror the donut.
Read the guide →
Fifty beginner-friendly plushie patterns with minimal seaming.
View pattern →
Twenty soft animal patterns to practise shaping on.
View pattern →Mark round one
Move the marker every round.
Write it down
Note each increase round.
Stuff early
Small pinches, not one wad.
Mirror exactly
Decreases match increases.
Frequently asked questions
How do I crochet a donut shape step by step?
Chain an even number of stitches and join into a loop to set the hole. Work one plain round into the chain, then two or three increase rounds on the outer edge to build the curve. Add straight rounds for thickness, stuff in small sections as the tube forms, then work decrease rounds that exactly mirror your increases and close the final edge against the original chain.
Why does my crochet donut ruffle on the outside?
You increased faster than the curve needed. The outer edge has more fabric than the circumference can absorb, so it buckles into waves. Remove one increase round, or spread the same number of increases over more rounds by changing a round like (sc 5, inc) to (sc 6, inc).
Why is my crochet ring cupping instead of lying flat?
Cupping is the opposite problem to ruffling: you increased too slowly. The outer edge does not have enough stitches to travel the longer distance, so it pulls the fabric into a bowl. Add one more increase round before you move on to the straight rounds.
What chain length should I start a crochet donut with?
Your starting chain becomes the hole in the middle, so choose it based on the centre you want. A chain of 12 gives a small tight hole suitable for a keyring, 24 gives a classic play donut, and 48 gives a large cushion-sized ring. Always use an even number and join without twisting the chain.
How many rounds make a thick donut?
The straight rounds between your increases and decreases control thickness. Three to five straight rounds give a soft everyday donut. Seven to ten give a chunky plush or cushion. Each straight round adds roughly one stitch height of depth, so you can adjust by eye as you work.
When should I stuff a crochet donut?
Stuff as you go, not at the end. The opening closes progressively as you work the decrease rounds, so wait until a channel has formed, then add small pinches of fiberfill roughly a third of the way behind your hook. Smooth each pinch outward before adding the next.
What yarn is best for a crochet donut?
Mercerised cotton gives crisp stitch definition and a firm ring that holds its circle, which suits teething rings and handles. Acrylic is softer and more forgiving of uneven tension, making it easier for a first attempt and better for larger cushions. Avoid fluffy halo yarns until your counts are reliable, because they hide your increases.
How do I stop stuffing showing through the stitches?
Go down one hook size to tighten the fabric, which is the most reliable fix. If you do not want to rework the piece, line the inside of the tube with a thin layer of fiberfill batting before adding the loose stuffing, so the loose fibres never press directly against the stitch gaps.
How do I close a crochet donut invisibly?
Work your final decrease round until the live stitch count matches your starting chain. Line the live stitches against the free loops of the original chain, then join through the back loops only with a whipstitch, matching your seaming tension to the surrounding fabric rather than pulling tight.
Can I crochet a donut without a chain start?
Yes. You can begin with a magic ring, work a flat circle to the diameter you want for the hole, then turn and work outward and around to build the tube. The chain method is more predictable for beginners because the hole size is fixed from the first stitch rather than judged by eye.
Why is one side of my donut fatter than the other?
Your decrease rounds do not mirror your increase rounds. Each increase round needs a matching decrease round worked in reverse order with the same stitch counts. Count back through your notes, find the round that does not have a partner, and rework from there.
What else can I use the donut formula for?
Any shape with a hole through the middle and volume around it. Life rings, wreath bases, tyres, bagels and play food, rattles, collars, inner tubes, and the wide joining ring between a head and a body. Once you can control the hole and the thickness independently, the same method covers all of them.
Put the formula to work
Shape formulas are the foundation. Our pattern bundles give you finished designs to practise them on, with clear photo steps and beginner-friendly construction.
Browse amigurumi patterns Browse beginner patterns












